How to Install Arch Linux

June 11, 2024

Introduction

Arch Linux is one of the most popular Linux distributions due to its versatility and low system requirements. It features a rolling release model, ensuring that users always have access to the latest Linux kernel and software updates.

This article is a step-by-step guide on how to install and configure Arch Linux on your computer.

How to Install Arch Linux - a tutorial.

Prerequisites

  • At least 1GB of RAM and 20GB of free hard drive space.
  • Internet connection.
  • A USB drive or DVD with at least 2GB of free space for the ISO image.

Important: The installation requires formatting your hard drive. Doing this removes all saved data. Make sure to back up relevant data before starting the installation process.

How to Install Arch Linux from Scratch

Installing Arch Linux from scratch gives you complete control over what is installed, allowing you to tailor the system to your needs. The installation process also helps you understand how Linux works, from partitioning your disk to configuring the bootloader (GRUB).

You will end up with a minimal installation that ensures no unnecessary software is running, which boosts system performance. Follow the steps outlined below to install Arch Linux.

Step 1: Download the Arch Linux ISO

Download the ISO from the Arch Linux download page. There are two ways to do so:

  • Via BitTorrent
  • As a direct download

To download the ISO via torrent, choose between adding a magnet link to your BitTorrent app or downloading the torrent file. Alternatively, scroll down the page until you find a mirror closest to your current location and download the ISO file:

Download Arch Linux ISO file.

Step 2: Create a Live USB or DVD

Once you have the Arch Linux ISO file, create a live USB or burn it to a DVD.

Create an Arch Linux Live USB

The simplest way to create the Arch Linux live USB is to use an app like Etcher GUI. The app is available for Linux and Windows systems.

If you are using Linux, you can also create a live USB using the dd command. The syntax is:

dd bs=4M if=/[path_to_archlinux.iso] of=/dev/[path_to_usb_device] status=progress && sync

Replace [path_to_archlinux.iso] with the actual path to your Arch Linux ISO file and [path_to_usb_device] with the correct path to your USB device. For example:

dd bs=4M if=/home/user/downloads/archlinux.iso of=/dev/sdX status=progress && sync

Warning: Be very careful when specifying the path to a USB device. Using the wrong device path can result in data loss as dd will overwrite the specified device without any warning. If you are not sure of the USB device path, check it by running:

lsblk | grep media

Burn the Arch Linux ISO to a DVD

You can also install Arch Linux from a DVD. Use a tool like Brasero or AnyBurn to burn the ISO you downloaded onto a blank DVD.

Step 3: Boot up Arch Linux

Start the installation process by booting Arch Linux from the installation media. Follow the steps below:

1. Insert the installation media into your machine and restart.

2. Depending on your system, press F2, F10, or F12 to enter the boot menu and select the device from which the system will boot.

3. With the boot menu open, select the preferred installation media (live USB or DVD). The following screen shows up after Arch Linux boots:

Selecting Boot Arch Linux (x86_64) in the boot menu

Select Arch Linux install medium (x86_64) and press Enter to start the setup process.

Step 4: Set the Keyboard Layout

The default keymap is set to US. To list other available layouts, run:

ls /usr/share/kbd/keymaps/**/*.map.gz

To change the layout, use the appropriate layout file name with the loadkeys command. For example, run the following command to select a German keyboard layout:

loadkeys de-latin1

Step 5: Check Your Internet Connection

Check your Internet connection using the ping command:

ping -c 3 google.com

To install Arch Linux using a wireless Internet connection, consult the Arch Linux wiki's wireless network configuration section.

Step 6: Enable Network Time Protocols (NTP)

Next, enable Network Time Protocols (NTP) and allow the system to update the time via the Internet:

timedatectl set-ntp true

To check the NTP service status, use:

timedatectl status
Enable and check NTP service status in Arch Linux.

Step 7: Partition the Disks

For this tutorial, we will create an EFI and root partition. Other partition schemas are available, depending on the firmware (BIOS or UEFI) and user preferences. Follow the steps below:

1. Use the fdisk command to list all available disk drives:

fdisk -l

2. Find the name of the disk you want to partition. The name is displayed in the /dev/sdX format, where X is the drive letter.

Find the name of the disk you want to partition

Note: When reviewing the list of available disk drives, ignore the ones ending in rom (read-only devices), loop (loopback devices), or airoot (root filesystem used by the Arch Linux live environment).

3. Partition the drive by adding the drive name to fdisk. The syntax is:

fdisk /dev/sdX

Replace X with the drive letter of the disk you want to partition. For example:

Opening a disk in with fdisk in an Arch Linux system to partition it.

4. Create an EFI partition at the beginning of the disk. Type n and press Enter to create a new partition. The system prompts you for the disk number, the block size, and the partition size. For the first two, keep the default values and press Enter.

For the partition size, type 512M and confirm with Enter. You can allocate more space, but 512M should be enough.

Create an EFI partition.

5. Change the EFI partition type from Linux filesystem to EFI system. Type t and press Enter. When prompted, type ef and press Enter to format the partition as EFI.

Format partition as EFI.

6. The next step is to create the root partition from the remaining free space. Type n and press Enter to create a new partition. Keep pressing Enter to accept all the default values until the system creates a new partition from the remaining free space.

Create root partition for Arch Linux.

7. Finally, when you finish partitioning the disk, type w and press Enter to write the changes to the disk.

Write partition changes to the disk.

To quit fdisk, type q and press Enter.

Step 8: Create Filesystem

The next step is to format the new partitions to install Arch Linux. To do this, create a file system for each of the partitions. Follow the steps below:

1. Use the mkfs command to create a FAT32 filesystem for the EFI partition:

mkfs.fat -F32 /dev/sdX1

Replace X with the drive letter of the disk to which the partition belongs.

2. Next, create an ext4 file system for the bootable partition:

mkfs.ext4 /dev/sdX2

Again, replace X with the drive letter of the disk to which the partition belongs.

For example:

Creating a filesystem for the new partitions in Arch Linux.

Step 9: Check the Mirror List for an Appropriate Mirror

The Arch Linux installation downloads the necessary files through a mirror. Downloading files from a mirror far from your location slows down the process, which eventually causes the installation to fail.

To speed up the download, set up the mirror list so that the fastest mirrors are at the top.

1. Start by syncing the pacman repository:

pacman -Syy
Synchronize the pacman repository

2. Install reflector to be able to update the mirrors and sort them by download speed. Add reflector by running:

pacman -S reflector
Installing the reflector package in Arch Linux.

3. If necessary, back up the mirror list with:

cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.bak

4. Use the reflector to update the mirror list:

reflector -c "XX" -f 12 -l 10 -n 12 --save /etc/pacman.d/mirrorlist

Replace "XX" with the code of your country (for example, enter "US" if you are located in the United States).

Note: The mirror list is located in /etc/pacman.d/mirrorlist.

Step 10: Install Arch Linux

Follow the steps below to install Arch Linux:

1. Mount the root partition with the following syntax:

mount /dev/sdX2 /mnt

Replace X with your drive letter.

2. Next, use the pacstrap script to install the necessary packages to the bootable partition:

pacstrap /mnt base linux linux-firmware nano

Depending on your download speed, the installation process might take some time.

Step 11: Configure Arch Linux

Once the Arch Linux installation is complete, you must configure some settings.

Generate the fstab File

The fstab file defines the order in which disk partitions, block devices, remote devices, and other data sources are mounted.

Create a fstab file by running:

genfstab -U /mnt >> /mnt/etc/fstab

Use Arch-Chroot and Enter the Mounted Disk as Root

Change the root to the newly installed Arch Linux system with the arch-chroot command:

arch-chroot /mnt
Switch to root in Arch Linux.

Set the Time Zone

Setting the correct time zone ensures the system clock reflects the accurate local time. Follow the steps below:

1. List all the available time zones:

ls /usr/share/zoneinfo

You can also list the subdirectories using the following syntax:

ls /usr/share/zoneinfo/[continent]

2. Find your time zone and make a note of the name.

3. Use the ln command to create a symbolic link from your desired timezone to /etc/localtime. Replace [Zone/SubZone] with your actual timezone:

ln -sf /usr/share/zoneinfo/[Zone/SubZone] /etc/localtime

For example, to set the timezone to America/New_York, run:

ln -sf /usr/share/zoneinfo/America/New_York /etc/localtime

Set the Locale

Set up the locale to determine the language, date, numbering, and currency format for your system. The locale.gen file contains a list of all available locales.

1. Open the file with nano and find the name of your preferred locale:

nano /etc/locale.gen

2. Uncomment the name (remove the #) of your preferred locale and any other you would like to use.

Setting the locale in Arch Linux.

3. Press Ctrl + X to exit and type Y to save the changes.

4. Generate a locale configuration file by running the following commands:

locale-gen
echo [locale_name] > /etc/locale.conf
export [locale_name]

Replace [locale_name] is the name of your preferred locale. For example:

Set up the locale in Arch Linux.

Note: You can also change the time zone and locale later while using your Arch Linux system.

Set the Hostname File

The hostname is a unique identifier for a machine within a network. It is especially important in environments with multiple devices, as it helps differentiate between various systems.

1. Create a hostname file and add your hostname with the following syntax:

echo [your_hostname] > /etc/hostname

2. Create a hosts file via touch command:

touch /etc/hosts

3. Edit the hosts file and add the following content:

127.0.0.1	localhost
::1		localhost
127.0.1.1	[your_hostname]

4. To enable the Dynamic Host Configuration Protocol (DHCP), type:

systemctl enable dhcpcd

Set the Root Password

Set up a new root password with the passwd command:

passwd

Running this command prompts you to type and then retype your new password.

Tip: Simplify and speed up password creation with our strong password ideas or our free password generator.

Step 12: Install Grub Bootloader

Next, install the GRUB bootloader. There are two ways to install GRUB, depending on whether you are using a non-UEFI or UEFI system.

Install GRUB Bootloader on a Non-UEFI System

A non-UEFI system uses the traditional Basic Input/Output System (BIOS) firmware interface for booting and system initialization, as opposed to the newer Unified Extensible Firmware Interface (UEFI) standard.

1. Add the GRUB bootloader packages with the pacman package manager:

pacman -S grub os-prober

2. Install the GRUB bootloader:

grub-install /dev/sdX

Replace X with the letter of the drive you want to install GRUB on. For example:

Installing the grub bootloader on non-UEFI Arch Linux system.

3. Create a GRUB configuration file with:

grub-mkconfig -o /boot/grub/grub.cfg
Creating the GRUB configuration file in non-UEFI Arch Linux system.

Install GRUB Bootloader on a UEFI System

A UEFI system is a modern firmware standard that replaces the traditional BIOS. It provides enhanced boot, security, and system management capabilities.

1. Add the GRUB bootloader packages with the pacman manager:

pacman -S grub efibootmgr

2. Create a directory for the EFI partition:

mkdir /boot/efi

3. Mount the EFI partition to the directory you created:

mount /dev/sdX1 /boot/efi

Replace X with the drive letter of the disk the partition belongs to.

4. Install GRUB with:

grub-install --target=x86_64-efi --bootloader-id=GRUB --efi-directory=/boot/efi
Install GRUB on EFI Arch Linux system.

5. Finally, create a GRUB configuration file:

grub-mkconfig -o /boot/grub/grub.cfg
Create GRUB config file in EFI Arch Linux system.

Step 13: Create a New User and Set up Privileges

This step is optional but recommended. Having a system with only the root user does not require authentication for any changes, making it vulnerable and susceptible to failure.

Follow the steps below to create a new user:

1. Install sudo before adding a new user:

pacman -S sudo

2. Create a new user with this syntax:

useradd -m [username]

Replace [username] with the user name you want to create.

3. Create a password:

passwd [username]

4. Add the user to a group of users that grants specific permissions:

usermod -aG wheel,audio,video,storage [username]

5. Lastly, edit the visudo file, specifically the line referring to the wheel group and uncomment it:

EDITOR=nano visudo
Edit the visudo file in Arch Linux.

6. Save the changes and exit the file.

Step 14: Exit Arch-Chroot Environment and Reboot

Finally, reboot the machine to load the new Arch Linux installation.

1. Exit the arch-chroot environment:

exit

2. Unmount the root partition with:

umount -l /mnt

3. Then, remove the USB or DVD and reboot the system with:

sudo reboot

Step 15: Log in to Arch Linux

Once the system reboots, GRUB loads and allows you to load Arch Linux. Press Enter to load the system. Use the password you set up to log in.

Boot Arch Linux after installation.

Conclusion

After following this guide, you have installed and configured Arch Linux on your computer. Arch Linux is a highly customizable, minimalist, and up-to-date system that allows users full control over their operating environment and software. It is ideal for advanced users who want a tailored computing experience.

Next, if you need an Arch Linux desktop environment, refer to our guide on how to install GNOME in Arch Linux.

Was this article helpful?
YesNo
Bosko Marijan
Having worked as an educator and content writer, combined with his lifelong passion for all things high-tech, Bosko strives to simplify intricate concepts and make them user-friendly. That has led him to technical writing at PhoenixNAP, where he continues his mission of spreading knowledge.
Next you should read
How to Format Disk Partitions in Linux
December 2, 2020

Formatting and mounting disk partitions in Linux is common because partitions cannot be used without this...
Read more
Introduction to the Linux File System
October 24, 2024

A file system is a set of processes that controls how, where and when data is stored and retrieved from a...
Read more
How to Mount NTFS Partition in Linux
October 8, 2020

In Linux, an NTFS partition is accessed in dual-boot setups where file exchange between drives is required.
Read more
How to Install Ubuntu 20.04 LTS Desktop (Focal Fossa)
May 25, 2020

This article helps you install Ubuntu 20.04 on your machine. The latest Ubuntu Focal Fossa was released on...
Read more